Bioflex Tapered Insertion Pin for Bioflex Push-fit Labrets
Material: BioFlex, Type: Tools and Piercing Supplies

These Bioflex Tapered Insertion Pins are for Bioflex Push-Fit Labret shafts. The pins push inside the shaft of the labret. This style of insertion pin is available for Bioflex push-fit labret shafts measuring 1.0mm and 1.2mm gauge only. NB: A Steel or Titanium top will need inserted into the labret shaft a few times to relax the shaft before inserting the Bioflex pin. The insertion pin will also need inserted and removed a couple of times first before using.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.

✔

Suitable for Autoclave.